Custom Wheels and Tires For Your Ride

September 11, 2015

It seems like everywhere you go in the area you see custom wheels. Big trucks, little cars, mini-vans – it doesn’t matter, car owners are expressing themselves with custom wheels. Some car owners want smaller tires and wheels – some want larger – and some want them enormous. So where do you start if you want new wheels? At , we suggest you start with your budget. We know, that sounds so practical. But if the look you’re after goes beyond just new tires and wheels and enters into the world of suspension modifications, you need to be prepared for the additional cost.

Let’s start with something easy – you want to give your ride a unique look and the stock wheel size is just right for you. One of the concerns you will have is that the new wheels have the same offset as your factory wheels.

First, what is offset? The wheel bolts onto the hub on the ‘s axle. The distance from the inside edge of the wheel to the point at which it bolts on, is the offset. If the new wheel has a different offset from the factory, the tires may rub on the inside or outside of the wheel well. That could lead to catastrophic and (costly)  tire failure.

Your tire and wheel professional at in can help you find the right size wheel – or install adapters to make your new wheels fit. All you have to do is pick from the hundreds of styles available.

,

So, what about motorists who want to upsize? Well, if you pick bigger wheels, but you want to keep the same overall tire diameter, that’s pretty easy for the team at . The same offset concerns apply. You need to know that the tires will likely be a little bit wider than the originals and you don’t want them to rub when you make sharp turns. Your tire professional at in will help you avoid this.

It is also critical to keep the same overall tire diameter because changing the rolling diameter can mess with your anti-lock brakes and stability control systems. Are you starting to see why you want to speak with your tire and wheel expert at in ? Is “super-size me” your motto? If it is, you are going to have to lift your vehicle to make room for those huge tires. A mild lift doesn’t require extensive modifications. An extreme lift means a lot of new hardware under the vehicle. It also means a lot of stock electronic systems need to be recalibrated to the new tire size. For example, your speedometer and odometer will give false readings if they aren’t recalibrated. (You don’t want to risk getting speeding tickets on interstates because your speedometer shows a lower-than-actual speed.)

motorists who want to upsize should also be aware of possible performance issues. Bigger tires and wheels weigh more. automotive experts refer to this as unsprung weight because it isn’t held up by your suspension system. Increased unsprung weight affects performance in different ways than an equivalent amount of groceries or little soccer players in the passenger compartment. Acceleration is negatively affected. Stopping distances may also be increased – sometimes significantly.  auto owners who want really big tires and wheels, might need to upgrade their brakes to compensate.

Heading the other direction, some car owners in the area like to run smaller than standard wheels and lower the suspension. All of the same fitment issues still apply as well as calibration issues. Don’t think that suspension modifications are a bad thing. Many systems actually improve ride, function and performance over the stock set-up.

Regardless of your budget, you want your to continue to do all the things you need it to do. Some of those show cars and trucks you see on TV and showrooms  look marvelous, but have been modified in ways that may not suit your needs. For example, if you put large rims on your SUV with low profile tires, you may be in for busted rims if you go off-roading a lot around . There just isn’t enough sidewall to absorb the impact of thumping over rocks.

Some motorists stuff the largest tires and wheels possible in their vehicles but have to severely restrict suspension travel so that the tires aren’t rubbing all day. That can lead to a very harsh ride around . Again, talk with your wheel professional about all of these things: how you drive in , what look you are going for, your budget and what compromises you are willing to make.

At the end of the day, you’re going to be rollin’ out of with one sweet ride.